LBL Lighting Volo SP - Manual (Page 2)

2
Connect the fixture to a suitable ground in accordance with
local electrical codes.
Connect the white fixture wire to the neutral power line wire
with a wire nut.
Connect the black fixture wire to the hot power line wire with
a wire nut.
Place all wires properly into the electrical box.
Mount the canopy to the electrical box/mounting plate
with two #8-32 screws provided.
Note: If mounting the fixture onto an octagonal
electrical box, first mount the provided universal
mounting plate before proceeding to the next step.
2A
2B
#8-32 SCREW
Mount the Fixture
1
2
3
3
1 2
4
5 5
4
5
Install the Lamp
LAMP
SOCKET
1
Use Volt, Watt Type A19 MAX 75 120
Medium Base Lamp.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Screw the lamp completely into the socket.
3A
1
1
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2013 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company