LBL Lighting Dome-S-I Grande SF - Manual

1
Installation Instructions for
Dome-S-I Grande 1.0 HS246_SC2G60
980DOMSIGSP
G P I : ENERAL RODUCT NFORMATION
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
Feed the socket assembly cord through a plastic washer, inner
glass shade, another plastic washer and threaded nipple
assembly respectively.
Secure the inner glass shade by tightening the threaded nipple
assembly to the socket bracket.
INNER GLASS
SHADE
THREADED NIPPLE
ASSEMBLY
PLASTIC WASHER
PLASTIC WASHER
CORD
NOTE: Do not over tighten the threaded nipple assembly
which may cause the glass shade to break.
THREADED NIPPLE
ASSEMBLY
PLASTIC WASHER PLASTIC WASHER
INNER GLASS
SHADE
Install the Glass Shield and Lamp
SOCKET
BRACKET
Suspension
1A
1 1
2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
2
1B