Flytec Alti Windwatch - Manual (Page 15)

Calibrating the wind-vane sensor
The
●
▼ key can be used to reduce the factor
and the ● ▲ key increases it. Press the key
briefly to alter the factor in 1% increments;
continuous pressure will alter the factor at a
higher speed.
Save your entry by waiting 8 seconds and
return to the main menu or change to the
selection of the display of the mean value or
the peak mean value by pressing both keys
●
▼
● ▲ simultaneously. The indicator for the
mean value or the peak mean value will flash
in the display.
E
13
Windspeed display Windspeed display
Option mode Option mode
The calculation time can be set between 5 and
60 seconds.
Save your entry by waiting 8 seconds and
return to the main menu; alternatively, you
can change to the calibration factor of the
wind-vane sensor by pressing both keys
●
▼
●
▲
simultaneously. The calibration factor for the
wind-vane sensor flashes on the display.
Calibration factor for
the wind-vane sensor