Flytec 3040/TT34 * - Manual (Page 7)

Operation manual Flytec 3040 Balloon 6
4.3 Altimeter Overview
1s 3s 1s
Exit set mode
Key Function Set
Mode
ALT ft
Altitude adjust
feet
QNH
QNH adjust
ALT m
Altitude adjust
meter
ALTI ft
QNH hpa
ALTI m
4.4 Altimeter ALTI ft / QNH / ALTI m
The altimeter indicates the absolute altitude above see level in ft or m.
When you adjust the altimeter, the QNH value is automatically reajusted.
The QNH display shows the reduced barometric pressure to sea level. consequently if
your current altitude is unknown it can be set by setting the QNH available from weather
reporting stations or flight service. With a known QNH, the height to be determined over
the sea. When you change the value of QNH, altimeter is updated automatically.
Press the yellow Altitude Key to alternate between
displaying
ALTI ft / QNH / ALTI m. The actual function is
indicated by the arrow indicator.
ALTI ft
QNH hpa
ALTI m
4.4.1 Set Mode ALTI ft / QNH / ALTI m
.
◄
2645
A long press on the yellow key ALTI brings the device to
the set mode of the current activatet function Alt. ft, QNH
or Alt. m
The display to be adjusted will flash, use the arrow keys to
adjust your current altitude/QNH.
Altitude and QNH can only be adjusted to current absolute
height, it can be adjusted in the QNH- range from 950 to
1060 hPa.
▼
▲
A long press to the arrow key buttons accelerate the
setting!
ALTI ft
QNH hpa
ALTI m
A short press of the yellow button, will stored the changes,
and quit the setting mode.