beautypg.com

Description, Preparations – Siemens TS22XTRM User Manual

Page 15

background image

15

SIEMENS

ENGLISH

Description

1. Water tank

2. Removable iron pad

3. Steam hose storage fixing

4. “calc’nClean Plus” scale collector

5. Mains cable storage compartment

6. Mains cable

7. Steam hose

8. “Energy Saving” button

*

9. “Steam ready” / “Auto shut-off” pilot light

10. Setting selector

11. “Refill water tank” / “Clean warning” pilot light

12. Illuminated main power button (0/I)

13. Iron fixation system “secureLock”

14. Housing with internal steam generator

15. Steam release button

16. Steam shot button “pulseSteam” *

17. Iron lamp

18. Soleplate

19. Fabric-protection soleplate cover*

* Model dependent

A

Preparations

1. Release the iron from its lock system (13) by

pulling the lever located at the heel of the iron

backwards.

2. Remove any label or protective covering from

the soleplate.

3. Place the appliance horizontally on a solid,

stable surface. You may remove the iron pad

from the appliance and place the iron on it on

another solid, stable, horizontal surface.

4. Fill the water tank, making sure not to pass the

level mark.

5. Unwind the mains cable (6) fully and plug it into

an earthed socket.

6. Set the main power button (12) to the on

position (illuminated in red).

7. The “Steam ready” indicator lamp (9) will light

up after several minutes, indicating that the

appliance is ready to use.

The steam generator will take more time to

reach “Steam ready” state only upon the initial

heating up, or after performing the de-scaling

operation (calc’nClean).

When water is already present in the steam

generator during regular use, heat up time to

reach the operating temperature will be faster.

8. This appliance has a built-in water level sensor.

The “refill water tank” indicator (11) will light

when the water tank is empty.

• This appliance is to be connected and used in

accordance with the information stated on its

characteristics plate.

• This appliance must be connected to an

earthed socket. If it is absolutely necessary to

use an extension cable, make sure that it is

suitable for 16A and has a socket with an earth

connection.

• If the safety fuse fitted in the appliance blows,

the appliance will be rendered inoperative. To

restore normal operation the appliance will

have to be taken to an authorised Technical

Service Centre.

• In order to avoid that, under unfavourable

mains conditions, phenomena like transient

voltage drops or lighting fluctuations can

happen, it is recommended that the iron is

connected to a power supply system with a

maximum impedance of 0.27Ω . If necessary,

the user can ask the public power supply

company for the system impedance at the

interface point.

• The appliance must never be placed directly

under the tap to fill the water tank.

• Unplug the appliance from the mains supply

after each use, or if a fault is suspected.

• The electrical plug must not be removed from

the socket by pulling the cable.

• Never immerse the iron in water or any other

fluid.

• Do not leave the appliance exposed to weather

conditions (rain, sun, frost, etc.)

Important:

This appliance reaches high temperatures and

produces steam during use, this could cause

scalds or burns if not used properly.

The steam hose, base station, metal plate at

the bottom of the removable iron pad (2) and in

particular the iron can get hot when used. This

is normal.

Never aim the steam at people or animals.

Do not allow the power cable to come into

contact with the soleplate when it is hot.

Be aware that the system can keep on

steaming for a short additional time after

releasing the steam trigger. This is a normal

function.

This manual is related to the following products: