Siemens GC28MAW30 - Manual (Page 34)

en
34
Problem Remedy Possible cause
Increased formation
of frost on the upper
edge of the
appliance. The condensation
water plugs are not in
the correct position. Insert the condensation water plugs
correctly on the floor of the
appliance and on the front of the
appliance.
The transport locks
were not removed Remove all four transport locks,
figure
# (see section "Installing the
appliance").
The chest lid is being
opened frequently. Do not open the lid unnecessarily.
After-sales service
You can find an after-sales service point
near to you in the telephone directory or
in the list of after-sales service points.
When you call the after-sales service,
quote your product number (E no.) and
the production number (FD no.) of your
appliance.
You will find this information on the
rating plate. Figure
+
Please help us to avoid unnecessary
journeys by quoting the appliance and
production number. This will save you
the additional associated costs.
Repair order and consultation
if faults occur
The attached after-sales service
directory contains the contact data for all
countries.
GB 0844 8928999 Calls from a BT
landline will be
charged at up to
3 pence per
minute. A call
set-up fee of up
to 6 pence may
apply.
IE 01450 2655
US 866 447 4363 toll-free