Siemens LF957GA60 - Manual (Page 29)

29
Installation
0 8. Insert the extractor hood over the
installation aids on the support frame.
5. Screw together the upper and lower
sections of the support frame at the
specified overall height with 8 screws.
10. Align the extractor hood. To do this,
loosen the ceiling screws in the support
frame.
0 9. Screw the extractor hood to the support
frame and screw back the panel.
6. Screw the support frame to the ceiling
with 4 screws.
7. Remove the panel.
Exhaust air
430 – 710
Circulating air
430 – 750