Siemens TS45450 - Manual (Page 16)

16
SIEMENS
EN
gl
ISH
Description
1. Removable water tank
2. Removable iron pad
3. Carrying handles
4. Steam hose and mains cable storage compartment
5. Mains cable
6. Steam hose
7. “Energy Saving” button (green)
8. Display
9. Illuminated main power button (red)
10. Iron fixation system “secureLock”
11. Housing with internal steam generator
12. Descaling filter
13. Steam release button
14. Steam release button “XTRM”*
15. Iron pilot light
16. Soleplate
17. Fabric-protection soleplate cover*
* model dependent
“i-Temp” function
This steam station has a unique “i-Temp” function.
When switching on the appliance it automatically
sets an appropriate combination of temperature and
steam, which is suitable for all fabrics that can be
ironed.
The “i-Temp” function prevents clothes from being
damaged due to an unsuitable temperature being
selected.
The “i-Temp” function does not apply to fabrics
that cannot be ironed. Please check the garment
care label for details or try ironing on a part of the
cloth not visible normally.
“antiShine” function
This steam station has a unique “antiShine” function.
If this function is selected and the steam release
button (13-14*) is regularly pressed, the risk of shiny
marks on the garment due to the ironing is reduced.
• This appliance is to be connected and used in
accordance with the information stated on its
characteristics plate.
• This appliance must be connected to an earthed
socket. If it is absolutely necessary to use an
extension cable, make sure that it is suitable for
16A and has a socket with an earth connection.
• If the safety fuse fitted in the appliance blows, the
appliance will be rendered inoperative. To restore
normal operation the appliance will have to be
taken to an authorised Technical Service Centre.
• In order to avoid that, under unfavourable mains
conditions, phenomena like transient voltage
drops or lighting fluctuations can happen, it is
recommended that the iron is connected to a
power supply system with a maximum impedance
of 0.47 Ω . If necessary, the user can ask the
public power supply company for the system
impedance at the interface point.
• The appliance must never be placed directly
under the tap to fill the water tank.
• Unplug the appliance from the mains supply after
each use, or if a fault is suspected.
• The electrical plug must not be removed from the
socket by pulling the cable.
• Never immerse the iron in water or any other
fluid.
• Do not leave the appliance exposed to weather
conditions (rain, sun, frost, etc.)
Important:
▪
This appliance reaches high temperatures and
produces steam during use, this could cause
scalds or burns if not used properly.
▪
The steam hose, base station, metal plate at the
bottom of the removable iron pad (2) and in
particular the iron can get hot when used. This is
normal.
▪ Never aim the steam at people or animals.
▪ Do not allow the power cable to come into contact
with the soleplate when it is hot.
▪ Be aware that the system can keep on steaming
for a short additional time after releasing the steam
trigger. This is a normal function.