Siemens TE501501DE - Manual (Page 38)

34
en
The appliance has been cleaned, descaled
and is ready for use again.
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust film
on stainless steel and must therefore be
washed out thoroughly before use.
Frost protection
A To avoid damage caused by frost
during transport and storage, the
appliance must be completely
emptied first.
Information: The appliance must be ready
for use and the water tank (16) filled.
1� Place a large container under the milk
frother outlet (6)�
2� Press the steam button (11)�
LED F flashes and the appliance now
heats up for approximately 20 seconds.
3� If LED F lights up, open the milk frother
(6) by pulling it out and release steam
for about 15 seconds�
4� Press the power on/off switch O / I (9) to
switch off the appliance�
5� Empty the water tank (16) and the drip
tray (8).
Accessories
The following accessories are available
from retailers or from customer service:
Accessories Ordering number
Retail /
Customer service
Cleaning tablets TZ60001 / 00310575
Descaling tablets TZ80002 / 00576693
Water filter TZ70003 / 00575491
Care set TZ80004 / 00576330