Matrix Orbital LK202-25 - Manual (Page 27)

23
6.7 Auto Repeat
Mode Off Dec
Hex
ASCII 254 96
FE 60
■ `
v5.6
Turns auto repeat mode off. Default is on (typematic).
6.8 Assign Keypad
Codes Dec
Hex
ASCII 254 213
FE D5
■ ╒
Key Down Key Up
Key Down Key Up
Key Down Key Up v5.6
Assigns the key down and key up values sent to the host when a key press is detected. A key up and key down
value must be sent for every key, a value of 255 will leave the key unaltered. Defaults are shown below.
Key Down Bytes [25] Key down values, beginning at row one column one moving right then down.
Key Up Bytes [25] Key up values, beginning at row one column one moving right then down.
Table 18: Default Key Down Values
Key Down
A(65) B(66) C(67) D(68) E(69)
F(70) G(71) H(72) I(73) J(74)
K(75) L(76) M(77) N(78) O(79)
P(80) Q(81) R(82) S(83) T(84)
U(85) V(86) W(87) X(88) Y(89)
Table 19: Default Key Up Values
Key Up
a(97) b(98) c(99) d(100) e(101)
f(102) g(103) h(104) i(105) j(106)
k(107) l(108) m(109) n(110) o(111)
p(112) q(113) r(114) s(115) t(116)
u(117) v(118) w(119) x(120) y(121)
6.7 Display Functions
7.1 Backlight
On Dec
Hex
ASCII 254 66
FE 42
■ B
Minutes
Minutes
Minutes v5.6
Turns the display backlight on for a specified length of time. If an inverse display color is used this command will
essentially turn on the text.
Minutes Byte Number of minutes to leave backlight on, a value of 0 leaves the display on indefinitely.
7.2 Backlight
Off Dec
Hex
ASCII 254 70
FE 46
■ F
v5.6
Turns the display backlight off. If an inverse display colour is used this command will turn off the text.