beautypg.com

2 usb module, Recommended parts, Usb connections – Matrix Orbital LK162-12 User Manual

Page 9

background image

5

3.2 USB Module

The LK162-12/VK162-12-USB offers a single USB protocol for an easy connection to a host computer.
This simple and widely available protocol can be accessed using the on board mini B style USB connector
as outlined in the USB Connections section.

Recommended Parts

Figure 7: External Mini USB

Cable (EXTMUSB3FT)

The External Mini USB cable is recommended for the LK162-12/VK162-12-
USB display. It will connect to the miniB style header on the unit and
provide a connection to a regular A style USB connector, commonly found
on a PC.

USB Connections

The USB connection is the quickest, easiest solution for PC development. After driver installation, the
LK162-12/VK162-12-USB will be accessible through a virtual serial port, providing the same result as a
serial setup without the cable hassle. To connect to your LK162-12/VK162-12-USB please follow the
steps below.

1. Set the Protocol Select jumpers.

USB: The LK162-12/VK162-12-USB offers USB protocol only. Model specific hardware prevents
this unit from operating in any other protocol, and does not allow other models to operate in
USB. Protocol Select jumpers on the USB model cannot be moved.

2. Make the connections.

Plug the mini-B header of your External Mini USB cable into your LK162-12/VK162-12-USB and
the regular USB header into your computer USB jack.

3. Install the drivers.

a. Download the latest drivers at

www.matrixorbital.ca/drivers

, and save them to a known

location.

b. When prompted, install the USB bus controller driver automatically
c.

If asked, continue anyway, even though the driver is not signed

d. When the driver install is complete, your display will turn on, but communication will not yet be

possible.

e. At the second driver prompt, install the serial port driver automatically
f.

Again, if asked, continue anyway

4. Create.

Use uProject or a terminal program to get started, and then move on with your own
development. Instructions for the former can be found below and a number of application
notes are available for the latter at

www.matrixorbital.ca/appnotes

.

This manual is related to the following products: