Matrix Orbital GLC24064 - Manual (Page 38)

Command Syntax Notes
Draw Outline Rectangle FE 72
[color][x1][y1][x2][y2]
254
114
[color][x1][y1][x2][y2]
254
’r’
[color][x1][y1][x2][y2]
Draws a rectangular outline using
color [color].
Draw Solid Rectangle FE 78
[color][x1][y1][x2][y2]
254
120
[color][x1][y1][x2][y2]
254
’x’
[color][x1][y1][x2][y2]
Draws a solid rectangle using color
[color].
Initialize Bar Graph FE
67[ref][type][x1][y1][x2][y2]
254
103
[ref][type][x1][y1][x2][y2]
254
’g’
[ref][type][x1][y1][x2][y2]
Sets aside space for a bar graph.
[ref] is reference number (0-15) for
use by the Write to Bar Graph com-
mand. [type] has values: 0 = ver-
tical, starting from bottom 1 = hor-
izontal, starting from left 2 = verti-
cal, starting from top 3 = horizontal,
starting from right
Write to Bar Graph FE 69 [ref][value] 254
105 [ref][value] 254 ’I’
[ref][value] Fills the bar graph referred to as [ref]
from start to [value]. [value] is in
pixels.
Display Saved Bitmap FE 62 [ref][x][y] 254
98 [ref][x][y] 254 ’b’
[ref][x][y] Causes bitmap [ref] to be displayed
with its top left corner starting at po-
sition (x,y).
Initialize Strip Chart FE 6A
[ref][x1][y1][x2][y2]
254
106
[ref][x1][y1][x2][y2] 254
’j’ [ref][x1][y1][x2][y2]
[ref] is a reference number from 0 -
6, allowing 7 strip charts to be de-
fined.
Shift Strip Chart FE 6B [ref]
254 107 [ref]
254 ’k’ [ref] [ref] selects the strip chart and
the direction in which it moves.
Movement is always 8 pixels at a
time.MSB = 0 shifts left MSB = 1
shifts right.
7.6 File System Commands
In addition to these commands, the mogd.exe program is used to download fonts and graphics to the
display.
Table 19: File System Commands
Matrix Orbital GLC24064 34