Matrix Orbital GLK24064R-25-1U - Manual (Page 52)

Command Summary 47
6.14 Scripting
14.1 Upload a
Script File Dec
Hex
ASCII 254 92 2
FE 5C 02
■ \
STX
ID Length Data
ID Length Data
ID Length Data v8.3
Save a list of commands to be executed at a later time. Bytes are saved as if they are being sent by the host, for
upload protocol see the
File Transfer Protocol or XModem Transfer Protocol entries.
ID Short Unique identification number of the script, value between 0 and 1023.
Length Integer Length of the script in bytes.
Data Byte(s) Data to be sent to the display when the script executes.
14.2 Set
Scripted Key Dec
Hex
ASCII 254 141
FE 8D
■ ì
ID Row Column Down Script Up Script
ID Row Column Down Script Up Script
ID Row Column Down Script Up Script v8.4
Create a key behaviour that responds to a press event by executing an uploaded script.
ID Byte Unique key identification number, maximum based on number of keys available.
Row Byte The row value of the key to be linked to the specified scripts.
Column Byte The column value of the key to be linked to the specified scripts.
Down Script Short Identification number of the script to run on a down event, value between 0 and 1023.
Up Script Short Identification number of the script to run on an up event, value between 0 and 1023.
*Note: The command number for Set Scripted Key is 142 at all firmware revisions less than 8.4.
14.3 Set Scripted
Button Dec
Hex
ASCII 254 142
FE 8E
■ Ä
ID X Y Width Height Type Down Script Up Script
ID X Y Width Height Type Down Script Up Script
ID X Y Width Height Type Down Script Up Script v8.3
Create a button region that responds to a touch event by executing an uploaded script.
ID Byte Identification number of the touch region, value between 0 and 31
X Byte Leftmost coordinate.
Y Byte Topmost coordinate.
Width Byte Width of touch region.
Height Byte Height of touch region.
Type Byte Type of touch region. Must be 1.
Down Script Short Identification number of the script to run on a down event, value between 0 and 1023.
Up Script Short Identification number of the script to run on an up event, value between 0 and 1023.
14.4 Run
Script File Dec
Hex
ASCII 254 93
FE 5D
■ ]
ID
ID
ID v8.3
Execute a previously loaded script. Script 0 is loaded automatically on startup, unless in override mode.
ID Short Identification number of the script to run, value between 0 and 1023.