Important safety information, English – Wagner SMART SideKick Roller User Manual
Page 2

English
2
© Wagner Spray Tech. - All Rights Reserved
Important Safety Information
Read all safety information before
operating the equipment. Save these
instructions.
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
To reduce the risks of fire or explosion,
electrical shock and the injury to
persons, read and understand all
instructions included in this manual. Be
familiar with the controls and proper
usage of the equipment.
HAZARD: EXPLOSION OR FIRE
Solvent and paint fumes can
explode or ignite, causing
property damage and/or
severe injury.
PREVENTION:
• Exhaust and fresh air introduction must be
provided to keep the air within the work area
free from accumulation of flammable vapors.
• Avoid all ignition sources such as static
electricity sparks, open flames, pilot lights, hot
objects, cigarettes, and sparks from connecting
and disconnecting power cords or working light
switches.
• Fire extinguishing equipment must be present
and in working order.
• Do not use materials with a flashpoint below
100° F (38° C). A fluid’s flashpoint is the
temperature at which vapors from the fluid
could ignite if exposed to a flame or spark.
Consult your paint supplier for information
about a fluid’s flashpoint.
• Keep the unit in a well ventilated location away
from the work area. The pump contains arcing
parts which emit sparks.
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other
materials may be harmful if inhaled,
causing severe nausea, fainting, or
poisoning.
PREVENTION:
• Use a respirator or mask whenever there is a
chance that vapors may be inhaled. Read all
instructions with the mask to insure that it will
provide the necessary protection against the
inhalation of harmful vapors.
HAZARD: GENERAL
May cause property damage or severe
injury.
PREVENTION:
• Read all instructions and safety precautions
before operating any equipment. Never leave
the unit running while unattended. Unplug
whenever not in use.
• Never immerse the unit into any liquid.
• Comply with all appropriate local, state and
national codes governing ventilation, fire
prevention, and operation.
• This paint roller system is designed to be used
with authorized parts only. When using this
system with parts that do not comply with the
minimum specifications and safety devices of
the system manufacturer, the user assumes all
risks and liabilities.
• Before each use, check all hoses for cuts,
leaks, abrasion or bulging of cover or damage
or movement of couplings. If any of these
conditions exist, call Customer Service.
Note: Additional warnings are contained on the
tag molded to the electrical cord of the unit. Be
sure to read this tag before operating the unit.