Wagner Power_Roller_Max - Manual (Page 8)

English 8
Cleanup
Purging the paint hose:
1. Switch paint flow directional switch to “REVERSE”.
3. Fully press and release the handle button to switch the
motor on. Let the motor run for 2-3 minutes to pull paint
from the hoses back into the paint container. When
finished, fully press and release the handle button to
switch the motor off. Flip switch back to “PAINT”.
5. Insert thumb to first knuckle, pry and pull the cap from
the roller cover. Once the cap is removed, push the
core out the other end.
When you are finished with your project, follow these steps to return any remaining material left in the hose back into its
container. These steps should be followed no matter what type of material you used.
2. Place roller arm into rest area. Turn the variable speed
dial to 9.
4. Remove spatter shield. Press locking tab (a) and drop
roller cover assembly into a bucket of the appropriate
cleaning solution.
PAINT
REVERSE
(a)
IMPORTANT: Make sure your floors and furnishings
are protected from dripping paint when removing or
disassembling the roller assembly. Drop the parts into
a bucket of the appropriate cleaning solution while you
clean the unit.
9