Wagner Paint-N-Roll Plus - Manual (Page 2)

English 2
Getting
Started
Start Before you begin:
• Make sure the type of paint you use can
be cleaned with either mineral spirits (for
oil-based paints) or a warm water and soap
solution (for latex paints).
• It is a good idea to have drop cloths
protecting your floors and anything else in
the room that you do not want accidentally
splattered with paint.
impoRtant: Some oil-based paints
require a stronger cleaning solution than
mineral spirits and should not be used with
the paint n Roll™ plus. Using a cleaning
solution stronger than mineral spirits may
cause damage to the paint n Roll™ plus.
Check with your paint supplier to be sure
the oil-based paint you have can be cleaned
with mineral spirits.
Questions?
Call Wagner technical Service at:
1-800-760-3844
Register your product online at:
www.wagnerspraytech.com
Parts and Components
Assembly
1. Remove plastic bag from plunger.
Lubricate the plunger O-rings with
petroleum jelly.
4. Attach the roller cover assembly to
the roller arm.
5. Press the quick-release tabs on the
unit and attach the roller arm.
6. If painting a ceiling, attach the
spatter guard.
2. Insert the plunger into the main
tube. make sure o-rings do
not twist or cut.
3. Tighten the locking collar.
4 5 6
Quick-release
tabs
Spatter
guard
Fill valve
Fill tube
Locking
collar
Plunger
Head
Roller arm
assembly
Main
tube
Standard
container lid
Non-standard
container lid (not
included with
all models)
Roller
cover
Roller
core
Roller cap
1 2 3