Waterloo F1971 - Manual (Page 5)

5
Process:
• Insert Bottom into lower end of assembly and attach
using (4) 1/4-20 x 5/8" Carriage Bolt , (8) 1/4-20 x 3/4"
Button Head Screws, (4) 11/32" Washer and (8) 1/4-20
Serrated Flange Nuts.
• Finger tighten.
Items Needed:
1/4-20 x 5/8" Carriage Bolt (Qty: 4)
1/4-20 x 3/4" Button Head Screw (Qty: 8)
11/32" Washer (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 12)
Bottom (Qty: 1)
Carriage
Bolt
Nut
Figure 5
Figure 5.1
Washer
Nut Button Head Screw
Bottom
Square
Process:
• Install (4) Screw Levelers. Some adjustments may
be necessary after cabinet is in desired location.
• Place the cabinet in its upright position.
• Square the cabinet and wrench tighten all bolts.
Items Needed:
Screw Leveler (Qty: 4)
Magnet (Qty: 2)
Snap Grommet (Qty: 2)
Figure 6
Figure 6.1