Waterloo F1971 - Manual (Page 3)

ASSEMBLY
Process:
• Place (2) Backs with flanges up as shown.
(Use packaging material to prevent scratches.)
• Assemble (2) Backs, using (3) 1/4-20 x 3/4" Button Head
Screws, and (3) 1/4-20 Serrated Flange Nuts through
flanges.
• Finger tighten.
Items Needed:
1/4-20 x 3/4" Button Head Screw (Qty: 3)
1/4-20 Serrated Flange Nut (Qty: 3)
Back (Qty: 2)
Process:
• Attach (2) Side Panels using (2) 1/4-20 x 3/4" Button
Head Screws, and (2) 1/4-20 Serrated Flange Nuts
nuts in middle holes of each side. Leave end
holes open for later assembly.
• Finger tighten.
Items Needed:
1/4-20 x 3/4" Button Head Screw (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 4)
Side (Qty: 2)
3
Back Panel
Nut
Nut
Screw
Screw
Figure 2
Side Panel
Back Panel
Nut
Screw
Screws
Figure 1
Figure 1.1
Nuts
Side Panels
Back Panels