Waterloo F1971 - Manual (Page 4)

4
Process:
Note: Install top shelf first.
• Place the cabinet in its upright position.
• Insert Shelf from bottom of unit.
• Place in desired mounting location in back of unit, and
rotate into place as shown.
• Attach using (2) 1/4-20 x 5/8" Carriage Bolts, (2)
11/32" Washers, and (2) 1/4-20 Serrated Flange Nuts
in square mounting holes as shown.
• Repeat until all 3 shelves are in place.
• Finger tighten.
Items Needed:
1/4-20 x 5/8" Carriage Bolt (Qty: 6)
Shelf (Qty: 3)
11/32" Washer (Qty: 6)
1/4-20 Serrated Flange Nut (Qty: 6)
Figure 4
Figure 4.1
Top Bottom
Top middle
mounting position
Top
Washer
Carriage
Bolt
Nut Button Head Screw
Nut
Figure 3
Figure 3.1
Note: Shelves may be organized in several different
configurations. Below is the recommended initial shelf
spacing. Top and bottom shelf spacing may be adjusted as
necessary.
Carriage
Bolt
Washer
Nut
Flanges
toward bottom
Process:
• Insert Top into one end of assembly and attach
using (4) 1/4-20 x 5/8" Carriage Bolt , (8) 1/4-20 x 3/4"
Button Head Screws, (4) 11/32" Washer and (8) 1/4-20
Serrated Flange Nuts.
• Finger tighten.
Items Needed:
1/4-20 x 5/8" Carriage Bolt (Qty: 4)
1/4-20 x 3/4" Button Head Screw (Qty: 8)
11/32" Washer (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 12)
Top (Qty: 1)