Waterloo F1881 - Manual (Page 6)

Ball bearing slide - Pull slides and slide carrier out to fully
extended position (see illustration.) Hold the slide on the
cabinet while aligning it with the slide on drawer. Slightly
insert one side and repeat for the other side. Slowly push
drawer to its fully closed position to engage slide. Open
drawer and reclose to ensure proper operation.
REINSTALL DRAWERS
▪ To close, shut the drawer firmly until the latch engages.
▪ Pull back lightly to see if the drawer is completely closed.
▪ If the drawer does not stay closed, the striker may be
bent, or the striker rubs against the drawer slides.
▪ To fix the problem, lightly bend the striker until the drawer
will engage in the slide.
▪ To open, lift up on the drawer front while pulling
towards you.
MODIFYING DRAWER LOCK
6
OPERATION
slide carrier
slide
Striker