MagTek INTELLISTRIPE 50 - Manual (Page 8)

IntelliStripe 50 Smartcard Insertion Reader
2
CONFIGURATIONS
Part Number Flange Mounting Options* Description
21160104 Small IntelliStripe 50, Small Flange, with front gate
21160105 Small IntelliStripe 50, Small Flange, without front gate
21160106 None IntelliStripe 50, No Flange, with front gate
21160107 Large IntelliStripe 50, Large Flange, with front gate
21160108 None IntelliStripe 50, No Flange, without front gate
21160109 Large IntelliStripe 50, Large Flange, without front gate
21160110 Small IntelliStripe 50, Small Flange, without front gate
21160119 Small IntelliStripe 50, Small Flange, with front gate
*See Section 2, Installation, for mounting configurations and dimensions.
MOUNTING FEATURES
The product supports 3 types of mounting configurations: no flange, small flange, large flange.
Part numbers for the configurations are listed above in Configurations.
The Reader chassis is mounted so the smartcard is presented with the chip up as viewed by the
user. The smartcard contacts are at the top of the card slot and face downward. This orientation
permits the debris clearance feature. (See Section 2.)
DEBRIS CLEARANCE
The Reader features an “open card slot” design, which allows most debris to fall free from the
Reader slot and is large enough to allow “half cards” to drop free from the Reader.
SIDE LOAD SPRING
The side-load spring applies constant pressure to the card, ensuring that the card remains
stationary when the user’s hand is removed from the card.
RELATED DOCUMENTS
The IntelliStripe 50 Smartcard Insertion Reader will interface with cards that meet the standards
defined by ISO (International Standards Organization):
ISO 7810
Identification Cards – Physical Specifications
ISO 7816-1, -2, -3 Identification Cards – Integrated circuits with contacts