MagTek INTELLISTRIPE 50 - Manual (Page 13)

7
SECTION 2. INSTALLATION
The installation consists of
MOUNTING
No Flange
Shown in Section 1, Figure 1-3, the No Flange version is side mounted with four M3 (metric)
threaded inserts.
Small Flange
The small flange is shown in Section 1, Figure 1-2. The Small Flange version is front mounted,
and provides two holes of 3.30 mm (0.130”) diameter and two slots of 4.45 mm (0.180”) wide.
Various components of the IntelliStripe 50 Reader are shown in Figure 2-3 (below). The
orientation of the smartcard integrated circuit is with respect to the top view of the IntelliStripe
50 Reader.
PCB
10-Pin I/O
Connector
Flange Slot (2)
Flange Hole
Ø 3.30 mm (2 places)
Ø 0.130" (2 places)
Smartcard
Integrated
Circuit
ISO Contact Bracket
Bracket
Spring
Small Flange
Card Slot
10-Pin Connector
(8-Contact Smartcard Connector
1-Pin Card Seated Connector)
Gate Latch
Bracket
Flex Cable
Figure 2-1. Top View of IntelliStripe 50 Reader with Card