MagTek MICRImage CHECK READER - Manual (Page 21)

Section 3. Operation
13
3. To clean the Imager, use the cleaning swab, shown in Figure 3-5. Activate the swab by
bending the plastic tube until you hear a snap.
Figure 3-5. Activating the Cleaning Swab
4.
Wait until the liquid moves into the sponge tip. It should be damp when touched.
5. When the tip of the swab is damp, clean the Imager by wiping the swab up and down the
Imager as indicated in Figure 3-6.
Figure 3-6. Cleaning the Imager