MagTek PORT POWERED SWIPE READER - Manual (Page 8)

Port Powered Swipe Reader
2
FEATURES
Major features of the Swipe Reader are as follows:
•
Powered through the RS-232 serial port – no external power supply required
•
Hardware Compatible with PC or any computer or terminal with an RS-232 interface
•
Software Compatible with the MagTek MTD Windows Device Drivers or any RS-232
communications program
•
Bidirectional card reading
•
Reads encoded data that meets ANSI/ISO/AAMVA standards
•
Green/Red LED for status
CONFIGURATION
The Reader, LED Indicator, pin numbers for the 9-pin connector and the 25-pin adapter are
shown in Figure 1-2.
Figure 1-2. Reader Cable and Optional Adapter