MagTek MT-215 TTL SINGLE OR DUAL HEAD - Manual (Page 9)

Section 1. Features and Specifications
3
SPECIFICATIONS
The specifications for the Reader are listed in Table 1-2.
Table 1-2. Specifications
OPERATING
MSR Read-data Format
Specifications Supported ANSI/ISO/AAMVA 75 or 210 BPI on Track 1 (normally 210 BPI)
ANSI/ISO/AAMVA 75 or 210 BPI on Track 2 (normally 75 BPI)
Power Requirements
(VCC) Old Design (PCB Assy 21063528)
+5 VDC
±5% at 15mA
New Design (PCBA 21063548)
2.8 – 5.5 VDC at 15ma
Output Signal Levels
V ol = 0.4 V @ 1.5 mA
V oh = Vcc -0.5 V @ 2.0 mA
Recording Method Two-frequency coherent phase (F2F)
Speed Card Speed: 3 to 50 IPS
Head Life 1,000,000 passes (500,000 Insertion Cycles) minimum
I/O Connector For P/N 21065113, 9-Pin Header, 0.100" centers, single in line
For all others, 11-pin Header, 0.100" centers, single in line
MECHANICAL
Dimensions
Length
Width
Height
Without bezel With Flat-faced Bezel With Extended Bezel
4.4" (111.76 mm)
4.58" (116.33 mm) 5.09" (129.29 mm)
3.51" (89.15 mm) 4.00" (101.60 mm) 4.00" (101.60 mm)
1.24" (31.50 mm) 3.00" (76.2 mm) 3.00" (76.2 mm)
Bezel Thickness Flat Faced: 0.31" (7.87 mm); Extended: 0.82" (20.83 mm)
Weight Without bezel With Flat-faced Bezel With Extended Bezel
2.25 oz. (65 gr.) 3.85 oz. (109 gr.) 4.02 oz. (114 gr.)
ENVIRONMENTAL
Temperature
Operating
Storage
-22
o F to 158 o F (-30 o C to 70 o C)
-40
o
F to 176
o
F (-40
o
C to 80
o
C)
Humidity
Operating
Storage
10% to 90% noncondensing
10% to 90% noncondensing
Altitude
Operating
Storage
0-10,000 ft. (0-3,048 m)
0-50,000 ft. (0-15,240 m)