MagTek MT-215 TTL SINGLE OR DUAL HEAD - Manual (Page 12)

MT-215 TTL, Single or Dual Head Insertion Reader
6
MOUNTING
Figure 2-1 shows the dimensions for mounting when using a flat-faced MagTek Bezel.
Figure 2-2 shows the dimensions for mounting when using an extended MagTek Bezel. In these
configurations, the top view and the side view show the head mounted under the PCB with
connector J2 used.
The other head configurations are shown in Figure 1-1.
Note
For users who are interested in designing their own bezel, please
refer to the dimensions provided in Appendix A.
Figure 2-3 shows the board layout and indicates the cable connections for all head positions.