MagTek MT-215 TTL SINGLE OR DUAL HEAD - Manual (Page 8)

Model MT-215 TTL Single or Dual Head Insertion Reader
2
CONFIGURATIONS
Table 1-1 lists the part numbers, head mounted position, bezel type, and forward or reverse read.
Table 1-1. Configurations - Tracks 1 and 2
Part Number Head Mounted Under
or on Top of PCB Bezel Read Forward or
Reverse*
21065101 Under PCB None Forward Read
21065102 On Top of PCB None Reverse Read
21065103 Under PCB Flat Faced Forward Read
21065104 On Top of PCB Flat Faced Reverse Read
21065105 Both None Both
21065106 Both Extended Both
21065109 Both Flat Faced Both
21065111 Under PCB Extended Forward Read
21065112 On Top of PCB Extended Reverse Read
21065113 Both None Both
* For forward read the start sentinel is read first on withdrawal; for reverse read the start
sentinel is read last on withdrawal.
RELATED DOCUMENTS
The MT-215 will read cards that meet the standards defined by ISO (International Standards
Organization):
ISO 7811 Identification Cards - Mag-stripe Cards, Tracks 1-3
ISO 7810 Identification Cards - Physical Specifications (ID-1 Cards)
Available from ANSI: 212-642-4900, www.ansi.org
MAGTEK DOCUMENTS
I/O Interface, For TTL Swipe Readers, Technical Reference Manual, MagTek P/N 99875148