MagTek P-SERIES TTL - Manual (Page 2)

ii
Copyright
©
1999-2009
MagTek
®
, Inc.
Printed in the United States of America
Information in this document is subject to change without notice. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose,
without the express written permission of MagTek, Inc.
MagTek is a registered trademark of MagTek, Inc.
REVISIONS
Rev Number Date Notes
1 12 Aug 99 Initial Release
2 07 Sep 00 Sec 1, Specs, Mechanical, Length changed to (without bezel)
4.08” (103.6 mm); ( with extended bezel) 4.82” (122.4 mm).
Added weight of 3.5 oz to (100 g
±20%). Converted symbols
to Metric System [SI]
3 01 Jan 01 Front Matter: Changed copyright date; Changed warranty
date from 90 days to one year.
4 06 Apr 01 Front Matter: Changed Agency Approval to Class B, and
meets UL50 requirements.
Section 2, Installation: Changed Fig 2-5 and accompanying
text to reflect 7-pin connector on P/N 21065117.
5 19 Jul 01 Front Matter: Added TTL to Title. Changed agency approvals
to Class A, and added UL and CUL.
6 25 Jun 02 Section 2: Changed Tables 2-1 and 2-2 and relevant text for
back sensors from active high to active low.
7 09 Jul 02 Sec 1: Added ANSI address and Phone; added to Spec,
Output Signal Levels, and rearranged Table 1-2 and removed
MagTek connector from I/O connector type. Sec 2: Added
headers and Mates to Tables 2-1 and 2-2. Replaced Timing
diagram, Fig 2-6, for clarification.
8 16 May 03 Front Matter: added ISO line to logo, changed Tech Support
phone number, added new warranty statement.
9 8 May 06 To Section 2, Added support brackets
10 19 Sept 09 Replaced mounting brackets with angle bracket kit
(21064519) ; updated Limited Warranty & Agency Approvals