MagTek Excella Windows API99875313 - Manual (Page 59)

Section 4. Key-Value Pairs
51
Table 4-10. Section = DeviceStatus
Key
Key Description Value Value Description
State Give the state of the device. ONLINE Ready to process checks
OFFLINE Not ready
ERROR Not ready
ManualFeeder If there is a document present in
the manual feed. NOTSUP If the device does not have
Manual feeder capability.
EMPTY No document present on
the manual feed
DOCPRESENT Document present on the
manual feed
AutoFeeder If there is a document present in
the auto feed. NOTSUP If the device does not have
Auto feeder capability.
EMPTY No document present on
the auto feed
DOCPRESENT Document present on the
auto feed
Lamp1 Detects problem with front scan
bar OK Scan bar ready
NOTSUP Scan bar not present
DIM Light source is low
FAILED Scan bar not working
Lamp2 Detects problem with rear scan
bar OK Scan bar ready
NOTSUP Scan bar not present
DIM Light source is low
FAILED Scan bar not working
INK The status of ink cartridge. EMPTY No ink
NOTSUP The ink cartridge is not
present
OK The ink cartridge is ready
LOW Low ink
Path The state of the document path OK No path error
BLOCKED Path blocked
Printer Print cartridge present or not NONE No print cartridge installed
PRESENT Print cartridge detected
RTCBattery RTC (Real Time Clock) If there is
real time clock chip present in the
device, then device checks the
state of the battery. OK Real time clock ok
LOW RTC Battery not installed
or low
NOTSUP Real time clock chip is not
present in the device
ScanCalibStatus The device is calibrated at the
factory. The users can also
calibrate the device. The user
calibration takes precedence over
the factory calibration. If the user
calibration is not valid, the device
reverts to the factory calibration.
NONE The device is not
calibrated
FACTORY The device is using factory
calibration.
USER The device is using the
user calibration.
ERROR Neither the factory nor
user calibration is valid