AMICA OKC6767I EN User Manual
Page 7
7
Operation of the hood can be controlled by means of a combined switch (Fig. 6)
-
„1” – first speed of hood motor on,
-
„2” – second speed of hood motor on,
-
„3” – third speed of hood motor on,
-
„0” – motor off,
-
„L” – lighting on / off.
Fig 6
Regular maintenance and cleaning of the device will guarantee its good and fault-
less operation, and extend its life. Attention should be paid to replacing grease and
carbon filters according to manufacturer’s instructions.
1. Cleaning.
Grease filters should be cleaned every two months during normal operation of the
hood, in a dishwasher or manually, using mild detergent or liquid soap.
2. Replacement (Fig. 7).
To dismantle the filter proceed as
follows:
a) remove the bottom cover by
releasing the lock catch,
b) remove the metal grease filter
1.2. Operation
1.2.1. Control panel
1.3. Maintenance
1.3.1 Metal grease filters