Aiphone MASTER STATION AI-MS900 - Manual (Page 15)

15
Step 5. Press the [PTT] key again.
The erasure is then completed, as indicated by a confirmation tone.
Step 6. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode.
8.6.4. Auto dialing key registration confirmation
Step 1. Set the [REGISTER] switch on the master station's top panel to the ON position. The display panel
will be placed in registration mode.
Step 2. Press the [PTT] key.
The following characters will be displayed.
Step 3. Press the registered Auto dialing key to be confirmed. The selected key number (example: [2]) will be
displayed together with the registered number.
If the registered number being displayed exceeds the available display screen, pressing the [#] key
advances the display to the next digit screen, and pressing the [ ] key returns the display to the
previous digit screen.
Step 4. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode.
Re g –m ode
Au t o d i a l
2 : 1 2 3 4 5 6
Example showing auto dialing key [2] registration display
1 1 : 5 9 am
2 :
Example of auto dialing key [2]
1 1 : 5 9 am