ATEN ALTUSEN KM0832 - Manual (Page 106)

KM0832 User Manual
90
PORT MANAGEMENT
(continues on next page)
Setting Function
PORT ACCESS This function allows the administrator to define group and user
access to the computers on the installation on a port-by-port
basis.
Select a port from the list to manage user and group access to the
port. A list appears with the following choices: ADD GROUP, SET
GROUP ACCESS TYPE, DELETE ACCESS GROUP, ADD
USER, SET USER ACCESS TYPE, and DELETE ACCESS
USER.
To grant port access to a group:
1. Select ADD GROUP. The group list appears.
2. From the list, select the group to which you wish to grant
access to the port.
3. Press [Y] to confirm; or, press [N] to cancel.
To set the Group Access Type:
1. Select SET GROUP ACCESS TYPE. A list of all groups that
have been added to the port appears.
2. From the list, select the group for which you wish to set the
Group Access Type.
3. Set the Group Access Type: NONE—No port access; VIEW—
group members can only view video from the port; FULL—
group members can view video from the port and control the
port.
Note: If NONE is set, the port will not show up in the group
members' port lists on the OSD main screen.
4. Press [Esc] to exit. The Group Access Type you selected is
assigned to the group.
To revoke group access for a port:
1. Select DELETE ACCESS GROUP. A list of all groups that
have been added to the port appears.
2. From the list, select the group for which you wish to revoke
access to the port.
3. Press [Y] to confirm; or, press [N] to cancel.