Aussie Kanga - Manual (Page 22)

22
•Insert Heat Indicator studs into
Hood holes and secure using two
Lockwashers and two 10-24
Hexnuts. Do not overtighten or you
may crack Hood finish.
STEP 13-ATTACH HANDLE AND HEAT INDICATOR TO HOOD - BONZA MODELS
•Insert two 6mm x 90mm Bolts through recessed holes of Hood Handle, through Handle Spacers,
into front of hood and secure with 6mm Locknuts. Be sure to place the wide end of Spacer against
the Hood. Do not overtighten or you may crack Hood finish.
(ITEM 44 ACTUAL SIZE)
6mm x 90mm BOLT
2 pcs
(ITEM 46) HANDLE SPACER
2 pcs
(ITEM 47) 6mm LOCKNUT
2 pcs
(ITEM 45) HOOD HANDLE
(ITEM 49) LOCKWASHER
2 pcs
(ITEM 50) 10-24 HEX NUT
2 pcs
(ITEM 48) HEAT INDICATOR
LOCKNUT LOCKWASHER 10-24 HEX NUT
SPACERS
HEAT
INDICATOR
6mm x 90mm
BOLT
HOOD HANDLE
TOOLS: