beautypg.com

Aussie Kanga User Manual

Page 19

background image

.

•Fit venturi end of Burner through hole in the inside firewall (behind control panel) and onto Gas

Control Valve Nozzle (Fig. G & Fig. H). Be careful not to bend or force gas collector plates.

•Place other end of burner on lower

shoulder of rear firewall so Burner
Peg rests in Burner Locator Hole as
shown (Fig. I).

•Using Pliers, insert Cotter Pin

through hole in Burner Peg to
secure. This is easier done
from backside of grill looking up
underneath rear firewall.

•Repeat above steps for remaining

burners .

Holes in
Front firewall.

Gas Nozzle
Control Vavle

Manual Lighting
Holes

Top plate
of gas collector.

Gas Collector and
Electrode

Venturi end of
Burner inserted
over gas nozzle.

FIG. H

FIG. G

REFERENCE: ELECTRODE GAP
Adjust Tab if greater than 3/16”.

ELECTRODE

3/16” GAP
MAX.

TAB-GAS COLLECTOR

FIG. I

BURNER

BURNER PEG

BURNER
LOCATOR HOLE
IN LOWER
SHOULDER

COTTER PIN
Install from
underneath
Backside of grill.

19

This manual is related to the following products: