Aussie Kanga - Manual (Page 13)

STEP 5-WHEEL/ CYLINDER BRACKET ASSEMBLY
•Slide Axle out. With the notched side of Cylinder Bracket down, secure the Cylinder Bracket to
wheel end of Bottom Shelf using ¼” x ½” Bolts and tighten.
•Slide Axle back into position and push a Wheel Assembly onto each end of axle until the spring clip
locks into place.
•On Deluxe Models, slide end caps onto each Fixed Leg.
•GO TO STEP 7 FOR BONZA AND BONZA DELUXE MODELS.
13
1/4” x 1/2” BOLTS
CYLINDER BRACKET
WHEEL ASSEMBLY
(ITEM 26) CYLINDER BRACKET
(ITEM 27) 4 pcs
1/4” x 1/2” BOLT
(ITEM 23, 24, & 25)
WHEEL ASSEMBLY
2 PCS
TOOLS: