Kenwood TK-3301E - Manual (Page 28)

9
PROGRAMMABLE FUNCTIONS
■
Calling Alert (Side 1 key default)
Calling alert tones help identify yourself to party members
and inform them that you are calling. Your dealer can set
up your transceiver with of 0 calling alert tones. If each
party member uses a different tone, it is easy to know who
is calling. To make a call, press and hold the PTT switch,
then press the key programmed as Calling Alert.
• Release the key to end the tone.
■
Key Lock
Press and hold this key for second to lock/ unlock the
transceiver keys.
The following keys/ functions can still be used when Key
Lock is active:
Calling Alert, Key Lock, Monitor, Monitor Momentary,
PTT, Squelch Off, Squelch Off Momentary, and Volume.
■
Key Lock with Status Memory
This operates the same as Key Lock except that when the
transceiver power is turned OFF and then ON again, the
keys remain locked. Without Status Memory, when the
transceiver power is turned OFF and then ON again, the
Key Lock function will be cancelled.
■
Monitor
Momentarily press this key to deactivate QT or DQT
signaling. Press the key again to return to normal operation.
■
Monitor Momentary
Press and hold this key to deactivate QT or DQT signaling.
Release the key to return to normal operation.