Kenwood TK-3301E User Manual
Page 22
3
Table Number
Operating
Frequency
Table Number
Operating
Frequency
0
OFF
1
446.00625 MHz
5
446.05625 MHz
2
446.0875 MHz
6
446.06875 MHz
3
446.0325 MHz
7
446.0825 MHz
4
446.04375 MHz
8
446.09375 MHz
QT/ DQT SETTINGS
Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that
reject undesired signals on your channel. You will hear a call
only when you receive a signal that contains a matching QT
tone or DQT code. If a call containing a different tone or code
is received, squelch will not open and you will not hear the call.
Likewise, when transmitting using QT or DQT, the receiving
station must have a matching tone or code to hear your call.
Be aware that other parties can still hear your calls if they set
up their transceiver with the same tone or code.
The default QT/DQT settings for each channel are provided in
the table on page 5.
To change the QT/DQT settings of a channel:
1 With the transceiver power OFF, press and hold the PTT
switch and
Side 1 key while turning the transceiver power
ON.
• Continue to hold the
PTT switch and Side 1 key until the LED
lights orange and the transceiver announces “Self”.
2 Release the PTT switch and Side 1 key.
• The transceiver announces “Channel”.
3 Press the Side 1 or Side 2 key to select QT/DQT setup.
• The transceiver announces “Tone”.