Kenwood TK-3301E - Manual (Page 14)

5
Charging slot
Indicator
3 Slide a battery pack or a
transceiver equipped with a battery
pack into the charging slot of the
charger.
• Make sure the metal contacts of the
battery pack mate securely with the
charger terminals.
• The indicator lights red and
charging begins.
4 When charging is completed, the
indicator lights green. Remove
the battery pack or the transceiver
from the charging slot of the
charger.
• It takes approximately 3 hours to
charge the battery pack.
• When the charger will not be used
for a long time, unplug the AC
adapter from the AC outlet.
Note:
◆
When the indicator blinks red, the battery pack is either
defective or the battery pack contacts are not properly mated
with those of the charger.
◆
The ambient temperature should be between 5°C and 40°C
while charging is in progress. Charging outside this range may
not fully charge the battery.
◆
The battery pack life is over when its operating time decreases
even though it is fully and correctly charged. Replace the
battery pack.