beautypg.com

Advanced operations, Transmit power, Calling alert (fleetsync/ mdc-1200 only) – Kenwood TK-2312E User Manual

Page 33: Key lock, Send the gps data

background image

23

ADVANCED OPERATIONS

TRANSMIT POWER

Each channel is programmed with either high or low transmit
power. On high transmit power channels, press the key
programmed as [Low Transmit Power] to change the transmit
power to low power (you cannot change low transmit power
channels to use high power).

• The indicator appears while using low transmit power.

CALLING ALERT (FleetSync/ MDC-1200 ONLY)

The Calling Alert tone alerts party members that you are
making a call. To make a call using Calling Alert:
1 Briefly press and hold the key programmed as [Calling

Alert].

• Release the key to end the tone transmission.

2 Press

the

PTT switch and speak into the microphone in

your normal speaking voice.

KEY LOCK

Press and hold the key programmed as [Key Lock] for
2 seconds to lock the transceiver keys. Press and hold the
[Key Lock] key again to unlock the keys.

LOCKED

appears when a key is pressed while the keys

are locked.

Note: You can still use the following keys and functions when Key
Lock is activated: [Emergency], [Lamp], [Monitor], [Monitor
Momentary]
, [Squelch Off], [Squelch Off Momentary], [Key
Lock]
, PTT.

SEND THE GPS DATA

Press the key programmed as [Send the GPS Data] when the
GPS unit has been installed, to send your positioning data to
the base station.

This manual is related to the following products: