Kenwood TK-2312E - Manual (Page 31)

21
Note: Additionally, you can also use the keys programmed as
[Digit 1x Down], [Digit 1x Up], [Digit 10x Down], and [Digit 10x
Up] to adjust the Selcall number. [Digit 1x Up/Down] increases/
decreases the Selcall number by 1 each time the key is pressed.
[Digit 10x Up/Down] increases/decreases the Selcall number by
10 each time the key is pressed.
■ Receiving
When you receive a signal containing the correct tones,
squelch opens and you will hear the call.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the key
programmed as [Monitor].
• Your dealer can program the Monitor function to close again
after a specific time period elapses.
• If Transpond for 5-tone Signaling is programmed, an
acknowledgement signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone
will sound when the correct tones are received.
• Your dealer can program the transceiver to display the
received Selcall/Status.
To respond to the call, press the PTT switch and speak into
the microphone.