Kenwood TK-2312E - Manual (Page 24)

14
SCAN DELETE/ADD
You can add and remove zones and/or channels to and from
your scan list.
1 Select your desired zone and/or channel.
2 Press the key programmed as [Scan Delete/Add]
to remove a channel or press and hold the key for
approximately 1 second to remove a zone.
• The channel add indicator ( ) appears when the
selected channel is added to the scan sequence.
• The zone add indicator ( ) appears when the
selected zone is added to the scan sequence.
SCAN REVERT
The Scan Revert channel is the channel selected when you
press the PTT switch to transmit during scan. Your dealer can
program one of the following types of Scan Revert channels:
• Selected: The last channel selected before scan.
• Selected + Talkback: Same as “Selected”, plus you can respond
to calls on the channel at which scan is paused.
• Priority: The Priority channel.
• Priority + Talkback: Same as “Priority”, plus you can respond to
calls on the channel at which scan is paused.
• Last Called + Selected: The last channel on which you receive
a call. If you have not yet received a call, then the last channel
selected before scan.