Kenwood DNX5210BT - Manual (Page 13)

13
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT
Detaching The Front Panel
You can detach the front panel to prevent theft.
Press the < 0> button for 1 second to
open the front panel.
Then, detach the panel as the
diagrams below.
2
3
1
4
NOTE
• The attaching plate closes automatically
in about 10 seconds after the front panel
is released. Remove the panel before this
happens.
Detach the panel as the diagram
below.
1
2
● After detaching:
Put the panel in the protective bag
supplied with the unit.
NOTE
• To prevent deterioration, do not touch the
terminals of the unit and faceplate with
your fingers.
• If the terminals on the unit or faceplate get
dirty, wipe them with a clean soft dry cloth.
• For attaching the panel, see Attaching the
front panel (P.25).
B59-2101-00_00_12DNX7_QSG_E.indd 13 11/12/02 14:19