Kenwood DNN9250DAB - Manual (Page 98)

97
Return to the Top page
Radio and TV Tuner Operation
6 Preset list
Displays the list of preset stations and the information.
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Tunes in a station: Touch [
E] [F]. The method of frequency switching can be changed. See Seek
mode.
• The bar in center (tuner only) shows the current frequency location.
8 Sub function/ List switching key
Touch to display “Sub function menu” (7 in this table).
Touch and hold to switch between the preset list and the information list.
In tuner mode, tuned program information will be displayed.
Ñ
Multi function menu
The functions of each key are as follows.
[P1] - [P6]
Select the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
Displays the list of preset stations or services. For details, see Selecting Operation (P.100) .
[TI] (FM Tuner only)
Sets the traffic information mode on. For details, see
Traffic Information (P.102) .
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see
Auto memory (P.100) .
[PTY] (FM Tuner only)
Searches a program by setting program type. For details, see
Search by program type (P.101) .
[MONO] (FM Tuner only)
Select the Monaural reception.
[LO.S] (FM Tuner only)
Turns the Local Seek function on or off.