Language setup, P.126), Nition is off – Kenwood DNN9250DAB User Manual
Page 127: Or details on operation, see, Language setup (p.126)
126
Language setup
1
Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2
Set each item as follows.
GUI Language Select
Select the language used for the GUI and input
methods.
ASR (DNN9250DAB)
Select the language used for voice control
function.
Navigation Language Select
(DNN9250DAB/ DNN6250DAB)
Select the language used for navigation.
STT
Select the language used for Speech to Text
(STT).
TTS
Select the language used for Text to Speech
(TTS).
3
Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].
Ñ
Touch panel adjustment
(DNN6250DAB)
1
Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
2
Follow the instruction on the screen
and touch the center of each
.
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Ñ
Security setup
A red indicator will blink on the unit after the
ACC is set to OFF, warning potential thieves.
If turned to “ON” (default), the security
indicator on the front panel flashes when the
vehicle ignition is off.
1
Touch [Security] in the System Menu
screen.
Security screen appears.
2
Touch [ON] or [OFF] of [SI].