Kenwood TK-7160E - Discontinued - Manual (Page 28)

22
5-TONE SIGNALING
5-tone Signaling is enabled or disabled by your dealer. This function opens the
squelch only when the transceiver receives the 5 tones programmed in your
transceiver. Transceivers that do not transmit the correct tones will not be heard.
Note: Your transceiver functions include either 5-tone Signaling or FleetSync {page 19}, but not both.
M
Y
ID
Your dealer can program an ID number for your transceiver, to identify you to other
parties when you make a call. On TK-7160/ TK-8160 transceivers, if set by your
dealer, you can edit the ID number:
1 If the ID number is set to be edited, the ID number will appear on the display
when you turn the transceiver power ON.
2 To change the ID number, enter the new ID by pressing the and keys or
using the DTMF keypad.
• When pressing the and keys to enter a digit, select the desired digit, then
press the or C> key to shift the cursor to the left or right. Repeat this process
until the entire ID is entered.
3 Press the S or key to complete the entry.
M
AKING A
S
ELCALL
(S
ELECTIVE
C
ALLING
) (TK-7160/ TK-8160 O
NLY
)
A Selcall is a voice call to a particular station. To make a Selcall:
1 Select your desired zone and channel.
2 Press the key programmed as Selcall (5-tone) to enter Selcall Mode.
3 Press the and keys or enter an appropriate number using the DTMF
keypad to select the ID of the station you want to call.
• When pressing the and keys to enter a digit, select the desired digit, then
press the or C> key to shift the cursor to the left or right. Repeat this process
until the entire ID is entered.
• Press and hold the 0 key to enter a Group digit.
• Alternatively, press and hold the S or key to enter Selcall List mode. With the
Selcall List activated, you can select the desired station by pressing the and
keys. Press and hold the key to toggle the display between the station name
and the list number.
4 Press the S or key to complete the entry.
5 Press the key programmed as Call 1 or Call 2 to begin your call.
Note: Additionally, you can also use the keys programmed as Digit 1x Down, Digit 1x Up, Digit 10x
Down, and Digit 10x Up keys to adjust the Selcall number. Digit 1x Up/Down increases/decreases
the Selcall number by 1 each time the key is pressed. Digit 10x Up/Down increases/decreases the
Selcall number by 10 each time the key is pressed.