Multi function menu (p.61), Multi function menu – Kenwood DNX7250DAB User Manual
Page 62
61
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Tunes in a station: Touch [
1] [¡]. The method of frequency switching can be changed. See
.
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed.
Multi function menu
The functions of each key are as follows.
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
Displays the list of preset stations or services. For details, see
.
[TI] (FM Tuner only)
Sets the traffic information mode on. For details, see
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see
[PTY] (FM Tuner only)
Searches a program by setting program type. For details, see
[MONO] (FM Tuner only)
Select the Monaural reception.
[LO.S] (FM Tuner only)
Turns the Local Seek function on or off.
[
SETUP]
Touch to display the SETUP Menu screen. See
.
[
AUDIO]
Touch to display the Audio Control screen. See
[ REAR
]
Touch to mute the rear speaker.