Kenwood DNX7250DAB - Manual (Page 107)

106 106
Return to the Top page
Controlling Audio
Position DTA control
You can fine-adjust your listening position.
1
In Position screen, touch [Adjust].
2
Select the speaker you wish to adjust
by touching speaker icon.
3
Set DTA as follows.
[ 2], [3]
Adjust the settings of the DTA position.
Gain
Touch to adjust the gain of each speaker.
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
• If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1
Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Input the differences calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
Example: When [Front All] is selected as the
listening position
50cm
80cm
150cm
+70cm
+0cm
+100cm