RME DSP System Multiface - Manual (Page 51)

User's Guide HDSP System Multiface II © RME
51
Mouse: The original factory presets can be reloaded by holding down the Ctrl-key and clicking
on any preset button. Alternatively the files described above can be renamed, moved to a dif-
ferent directory, or being deleted.
Keyboard: Using Ctrl and any number between 1 and 8 (not on the numeric
keypad!) will load the corresponding factory default preset. The key Alt will
load the user presets instead.
When loading a preset file the file name will be displayed in the title bar of the
TotalMix window. Also when loading a preset by the preset buttons, the name
of the preset is displayed in the title bar. This way it is always clear what the
current TotalMix state is based on.
The eight factory presets offer a pretty good base to modify them to your personal needs. In all
factory presets Submix View is active by default.
Preset 1
Description: All channels routed 1:1, monitoring of all playback channels via Phones.
Details: All inputs maximum attenuation. All playback channels 0 dB, routed to the same output.
All outputs 0 dB, Phones -6 dB. Submix of all playbacks to the analog Phones output. Level
display set to RMS +3 dB. View Submix active.
Note: This preset is Default, offering the standard functionality of an I/O-card.
Preset 2
Description: All channels routed 1:1, input and playback monitoring via Phones. As Preset 1,
plus submix of all inputs (0 dB) on Phones.
Preset 3
Description: All channels routed 1:1, input and playback monitoring via Phones and outputs. As
Preset 2, but all inputs set to 0 dB (1:1 pass through).
Preset 4
Description: All channels 1:1, playback monitoring via Phones and outputs. As Preset 3, but all
inputs muted.
Preset 5
Description: All faders m.a. As Preset 1, but all outputs maximum attenuation, only Phones
monitor of the playbacks is active.
Preset 6
Description: Submix on SPDIF at -6 dB. As Preset 1, plus submix of all playbacks on SPDIF.
Preset 7
Description: Submix on SPDIF at -6 dB. As Preset 6, but submix of all inputs and outputs on
SPDIF (SPDIF Monitoring).
Preset 8
Description: Panic. As Preset 4, but playback channels muted too (no output signal).
Preset Banks
Instead of a single preset, all eight presets can be stored and loaded at once. This is done via
Menu File, Save All Presets as and Open All Presets (file suffix .mpr). After the loading the
presets can be activated by the preset buttons. In case the presets have been renamed (see
chapter 25.11), these names will be stored and loaded too.