Siemens VS06G2080 - Manual (Page 41)

40
B Textile filters (permanent filters) VZ10TFG
Reusable bag with Velcro(R) fastener.
C Hepa filter VZ153HFB
Additional filter for cleaner exhaust air.
Recommended for allergy sufferers. Replace once a
year.
D Micro-active carbon filter VZ192MAF
Combination of micro filter and active carbon filter.
Combats unpleasant odours. Replace twice a year.
Replace carbon filter frame with micro filter frame.
Please note! It is not possible to combine a Hepa
filter and a Micro-active carbon filter.
E TURBO-UNIVERSAL ® brush for upholstery VZ46001
All in one brushing and vacuuming of upholstered
furniture, mattresses, car seats, etc. Especially suit-
able for picking up pet hair. The brush roller is dri-
ven by the suction air flow of the vacuum cleaner.
No separate electrical connection is needed.
F TURBO-UNIVERSAL ® brush for floors VZ102TBB
All in one brushing and vacuuming of shallow pile
rugs and carpets and all hard floor coverings.
Especially suitable for picking up pet hair. The brush
roller is driven by the suction air flow of the vacuum
cleaner.
No separate electrical connection is needed.
G Hard-floor brush VZ123HD
For vacuuming hard floors (parquet flooring, tiles,
terracotta, etc.)
do not pour any flammable substances or substances
containing alcohol onto the filters (filter bag, motor
protective filter, exhaust filter, etc.).
Before using for the first time
Figure
Push the handle onto the flexible tube and until it
engages.
Figure
Push the crevice nozzle and upholstery nozzle back into
the accessories holder as illustrated.
Setting up
Figure
a) Push the flexible hose adapter into the air intake opening
on the vacuum cleaner lid until it engages.
b) To remove the flexible hose, press the two lugs together
and pull the tube out.
Figure
Push the handle into the suction pipe/telescopic tube.
To remove it, turn the handle slightly and pull it off the
tube.
Figure
Insert the suction pipe/telescopic tube into the adapter of
the floor tool.
To remove it, turn the tube slightly and pull it out of the
floor tool.
5*
4*
3
2*
1*
Figure
a) Connect the suction pipes together, or
b) Unlock the telescopic tube to adjust its length by moving
the sliding switch in the direction of the arrow.
Figure
Holding the power cord by the plug, pull out the required
length and plug it into the mains socket.
Figure
Press the on/off button in the direction of the arrow to
switch your vacuum cleaner on/off.
Controlling the suction level
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction of
the arrow.
Low power range =>
For vacuuming delicate materials, e.g. delicate
upholstery, curtains, etc.
Medium power range
=>
For daily vacuuming of lightly soiled floors.
High power range
=>
For vacuuming durable floor coverings, hard floors
and surfaces with heavy deposits of dirt.
Vacuuming
Figure
Adjusting the floor tool:
Ⅲ Rugs and carpets
=>
Ⅲ hard floors =>
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Figure
Remove the upholstery nozzle and crevice nozzle from
the accessories holder as illustrated.
Figure Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,
curtains, etc.
c) Furniture brush
For cleaning window frames, cabinets, mouldings, etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
12*
11
10
9
8
7
6*
9000 849 125 A (Innenteil) 05.12.2012 10:19 Uhr Seite 40