Kenwood TM-D710GA - Manual (Page 62)

APRS-17
■ UIFLOOD
When using the TM-D710G as a digipeater, set whether or
not UIFLOOD digipeat runs.
When the received UI Frame character string matches the
entered alias (for example, CA), the number of hops (for
example, 2-2) is processed and decreased by 1 (for example,
CA2-2 becomes CA2-1).
Enter Menu mode and access Menu 619.
1 Set UIFLOOD to [ON] or [OFF].
2 Press the Tuning control.
• You enter Alias Setting mode.
3 Enter the UIFLOOD alias.
• When running UIFLOOD digipeat, set the character string of
the alias that is used.
4 Press the Tuning control.
• You enter UIFLOOD SUBSTITUTION Setting mode.
5 Set one of [ID], [NOID], or [FIRST].
[ID]: Your station callsign is embedded. When there is already a
callsign in the relayed UI frame, your station callsign will replace
the existing callsign.
[NOID]: The callsign is not embedded or replaced.
[FIRST]: When there is no callsign in the relayed UI frame, your
station callsign is embedded. When there is already a callsign in
the relayed UI frame, the callsign is not embedded or replaced.
■ UITRACE
When using the TM-D710G as a digipeater, set whether or
not UITRACE digipeat runs.
When the received UI Frame character string matches the
entered alias (for example, WIDE), the number of hops (for
example, 2-2) is processed and decreased by 1 (for example,
WIDE2-2 becomes WIDE2-1), and your station callsign is
added to the UI Frame.
Enter Menu mode and access Menu 620.
1 Set UITRACE to [ON] or [OFF].
2 Press the Tuning control.
• You enter Alias Setting mode.
3 Enter the UITRACE alias.
• When running UITRACE digipeat, set the character string of
the alias that is used.
STORING USER PHRASES
Enter Menu mode and access Menu 621.
This function (clipboard image) allows you to paste phrases into
the APRS message compilation mode. You can create up to 8
phrases each of which can consist of up to 32 characters.
• The user phrase function can only be used in the message
compilation mode.
• Before a message is copied, the number of letters cannot be
guaranteed. Only the number of letters available will be copied, the
remainder will be truncated.
• To copy a message, enter message compilation mode, press [F] to
enter function mode, then press [PASTE1], [PASTE2], [PASTE3],
[PASTE4], [PASTE5], [PASTE6], [PASTE7], or [PASTE8] to copy
the message that has been set up for each key.
• If the user messages [PASTE1], [PASTE2], [PASTE3], [PASTE4],
[PASTE5], [PASTE6], [PASTE7], and [PASTE8], are not set up, they
cannot be used.